Mikrotron EOSENS GE CAMERA Spezifikationen Seite 11
- Seite / 37
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Initial setup EoSens GE Camera Manual
5 Initial setup
The EoSens is delivered with initial parameters and therefore does not need to be configured
via the serial link.
5.1 Serial number and firmware revision
Serial number and firmware revision is provided in EoSens non volatile memory and can be
read via software. The serial number is also marked on the type plate of the camera.
5.2 PowerUpProfile
The PowerUpProfile is the content of all camera registers to be loaded from non-volatile
memory after power up.
5.3 Camera profile
The actual set of parameters is called Camera Profile. All changes of parameters by the serial
link is reflected in the Camera Profile. On command the Camera Profile is saved to 4 user
profiles or the PowerUpProfile. It is loaded from the PowerUpProfile, 4 user profiles or 4
factory profiles. The camera profile is volatile and must be stored to the PowerUpProfile to be
reactivated on next power up.
5.4 Factory profiles
The factory profiles can be read but not written by the user. They are factory preset to the
settings described below.
Profile
Nr.
Video
data
width
/Mbyte/s
resolution
/ pixel
Image
frequency
/fps
0 92 640x480 300
1 106 1280x1024 81
2 31 640x480 100
3 26 1280x1024 20
- GE CAMERA MANUAL 1
- Table of contents 2
- EoSens GE Camera Manual 3
- 1 General 4
- 1.6 Warranty Note 6
- 1.7 Remarks, Warnings 6
- Important remark 6
- Attention, Warning 6
- 2 Introduction 7
- 2.4 Using the camera 8
- 3 Hardware 9
- 4 Getting started 10
- 5 Initial setup 11
- 5.5 User profiles 12
- 5.6 PowerUpProfile 12
- 6 Configuration 13
- 6.1 GenICam 14
- 6.2 Image size and position 15
- DecimationXY off ; on 16
- ReverseX, ReverseY 16
- 6.3 Framerate and shutter 17
- 6.4 Exposure control 18
- 6.5 Image quality 20
- FPNEnable 21
- 6.6 Other 22
- 7 MC Control Tool 24
- 8 Firmware 25
- 8.3 Firmware update procedure 26
- 9 Technical Data 27
- 9.3 Spectral response 29
- 9.4 Bayer pattern filter 30
- 9.5 Connector pinning 31
- 9.6 Timing diagrams 32
- 9.7 Mechanical dimensions 33
- 10.1 Software installation 34
- 10.2 Install the EBus Driver 34
- 10.5 Camera configuration 37
Verwandte Produkte und Handbücher für Brückenkameras Mikrotron EOSENS GE CAMERA
Brückenkameras Mikrotron MC13xx Spezifikationen
(50 Seiten)
(50 Seiten)
Brückenkameras Mikrotron MC13xx Bedienerhandbuch
(51 Seiten)
(51 Seiten)
Brückenkameras Mikrotron MC13xx Spezifikationen
(53 Seiten)
(53 Seiten)
(57 Seiten)
Brückenkameras Mikrotron MC132x Spezifikationen
(45 Seiten)
(45 Seiten)
Sharper Image Filtry powietrza podręczniki użytkownika
Zaczynanie od P
Kommentare zu diesen Handbüchern